Started 01st July '13
With a bit of bumper repair thrown in. Bumper was a 2010 part but had started rusting fairly notably in a few places. Rust treated, primed, Cellulose'd.
The alloys have been sanded to remove the worst then roughed up with scotch-brite pads and a pair of scotch-brite flap wheels on a drill. Primer used was Bilt-Hamber EtchWeld in Mid grey. Top coats were then rattle canned on using two coats of Upol alloy silver followed two or three coats of the Upol clear laquer. Spraying this much by rattlecan was made easier with the use of a rattlecan trigger unit.